Oil Tubes ????
I took it to the dealer to have it checked out before I go replacing things left and right and not get anywhere.
He said I needed my OIL TUBES replaced, all 16 of them. $1200. What do you experts have to say? And what are the oil tubes? Are they available from FastLane? Is he just telling me to replace stuff that I don’t need? Can I replace my self? The problem is low oil pressure. Please help |
There are plastic tubes that connect the lifter bores to each other, this job takes about 5-6 hrs total & the plastic tubes list for $13. You also would need valve cover cover gaskets.
Part number for the tubes are 119-180-02-66. The V/Cover gaskets are 119-010-13-30(L) & 119-010-14-30(R), list is $35. There is probably a few small hoses & other items that might run $50. You add it up & see what the total should be!! THIS would be for lifter noise! |
Thanks
Thank You Sir.
I have talked to Phil and they are on the way, tubes and valve cover + gaskets. But what other small hoses and little items I need? |
On the intake manifold there are "breather" hoses & the rubber falls apart.
Also on both of the front cam bearings there is a plastic guide rail that might break when it is removed. |
All times are GMT -4. The time now is 10:24 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website