Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-30-2013, 02:21 AM
MBeige's Avatar
Registered User
 
Join Date: Apr 2005
Location: SoCal
Posts: 3,746
Replacing fuel pumps, fuel accumulator and hangers (pics)

Just wanted to share pics of the replacement of two fuel pumps, the fuel accumulator and 4 hangers

Opened up the cover protecting the assembly:


Replace those hangers, they're cheap!


Old hoses



Old and new: fuel accumulator (notice the new one has a slightly longer body, but shorter tube; in contrast the old one has a shorter body but longer tube - same overall length though) - upgraded design?




Old and new: fuel pumps


This old one looks tired, but still ran well except for the weeping fuel


Probably original? Still has MB logo


Brand new Cohline-made hose, sold by MB



Brand new Bosch fuel pumps


Everything installed, ready to be buttoned up


We also replaced the differential oil



No more clunking when downshifting! No more fuel smell either. Starts right up also, no stumbling at startup. Hopefully this increases MPG slightly also.

Reply With Quote
  #2  
Old 04-30-2013, 02:23 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Nice pictures - I guess this is your W124?
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote
  #3  
Old 04-30-2013, 02:29 AM
MBeige's Avatar
Registered User
 
Join Date: Apr 2005
Location: SoCal
Posts: 3,746
Thanks Tristan. No, this is the W201 (1989 190E 2.6).

The W124 uses a different set of hoses, IIRC.
Reply With Quote
  #4  
Old 04-30-2013, 02:39 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Great stuff - I haven't been under either of those vehicles so it is all new to me.

I like your pump for the diff oil. Where did you get that?
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote
  #5  
Old 04-30-2013, 03:00 AM
MBeige's Avatar
Registered User
 
Join Date: Apr 2005
Location: SoCal
Posts: 3,746
My indy, who was the one doing the job, had this pump handy.

I've learned a ton from my 190E ownership especially under his care. Same goes with the 300D, also under his care.
Reply With Quote
  #6  
Old 04-30-2013, 03:34 PM
MBeige's Avatar
Registered User
 
Join Date: Apr 2005
Location: SoCal
Posts: 3,746
So the drive this morning was much smoother, still a but of a thunk but not as hard as before. Maybe I need to fine tune the bowden cable, but ultimately I'm pleased.

I now have run 83 miles to a quarter tank. My normal average was 70 miles per quarter tank.

When we did the work, we had to drain fuel from the tank, naturally. Upon completion of the job we poured the fuel back and I had to refuel. The volume I added was 13.7 gallons, with 274 miles to that one tank. Considering I lost fuel through the job, this is at least 20 mpg. Those 274 miles were 90% city driving (stop & go).

Considering the car used to have 15 to 16 mpg on a good day when the valves were shot and the transmission modulator made shifting and delivering power awkward, I'm happy where this is going.

I don't hear much difference between the old pumps and new pumps, so I'm attributing this to old pumps that were still good, except for the weeping fuel part.

Cold starts are MUCH better too, so far, with the new accumulator.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page