Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-30-2013, 04:54 PM
Registered User
 
Join Date: Jul 2011
Posts: 11
transmission help !!!

Re-sealed the front pump and torque converter, started up and no reverse. All forward is good, no leaks.

I’m fairly confidant that the piston seals are installed correctly, however, the K1 clutch came out with the pump and I found 2 or 3 pieces of fiber or gasket material beneath in the area of the lock assembly of the B1 brake band.

I removed the B1 band and removed the pieces and re-installed the B1 band and K1 clutch. The manual is not clear (to me) on the B1 install, “the lock must point to the pressure body B.” I installed the “male” part pointing towards the B1 pressure body.

I assume the gasket, fiber material is from the K1 clutch?

What are my options? Do I need to rebuild the K1 clutch, removing the transmission again or should I remove the valve body and thinking some of the material is blocking a port?

1985 190D
Attached Files
File Type: doc Doc1.doc (38.0 KB, 41 views)

Last edited by jet35a; 04-30-2013 at 04:57 PM. Reason: car info
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page