Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-17-2002, 01:03 PM
Registered User
 
Join Date: Mar 2000
Posts: 17
Changing Brake Fluid

Could someone please outline the correct proceedure for changing the brake fluid in my 300D?

Reply With Quote
  #2  
Old 03-17-2002, 01:13 PM
MikeTangas's Avatar
Senior Member
 
Join Date: Apr 2000
Location: So. Cal
Posts: 4,430
Pretty straight forward. Start by siphoning off most of the fluid in the resevoir, then top it off with fresh fluid. Then bleed the brakes by either the pressure bleed or the old fashioned two person method. Start at the right rear, then left rear, right front and left front in that order. Bleed them until fresh, clean fluid is coming out, I think the book calls for something like 80ml of fluid bled at each caliper.

Be sure not to spill any fluid on the paint.
__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.
Reply With Quote
  #3  
Old 03-17-2002, 01:53 PM
Registered User
 
Join Date: Mar 2002
Location: Los Angeles
Posts: 31
Mike Tangas is the right way. After doing it the correct way, I got to thinking that periodic replacement of the reservoir may do the job, it took 4-5 times every week and guess what.....the fluid started to clear all the way down to the calipers....not a 100% purity but then it is so time/cost-effective that I had made it a yearly practice after winter (the thing is hygroscopic so I figure when the old and new mixed if further clears it) It has been seven years with my 91 300E and 911SC and its so clear all this time. I figure every other week would work better(4 cycles while you have the hood open for other stuff). However, nothing beats the right way, as for me I'm sticking to my method. Same with the power steering fluid.......so clean.....so easy, and keep that fluid away from the paint please...Later.
__________________
Adam Reinosa
91 300E 190K
81 911SC 210K
61 MB 190C 90K - sold...sigh.
70 914-6 - DUI victim - sigh
911T - Fire victim
Renault Dauphine '62
67/Cougar GT;70 Challenger 440 Mag
www.wetstart.com - OEM future option coming soon
Reply With Quote
  #4  
Old 03-17-2002, 02:33 PM
Registered User
 
Join Date: Jul 2001
Location: Western Michigan
Posts: 1,080
Adam:

I read a while ago that replacing the fluid in the reservoir twice a year is all that is necessarily to keep the brake fluid in the entire system fresh.

Yes, the fluid does not circulate as engine oil, but apparently there is enough diffusion and fluid motion through braking for the new and old fluids to mix. Then if one replaces frequently enough (twice a year), the fluid remains fresh.
Reply With Quote
  #5  
Old 03-17-2002, 05:42 PM
Registered User
 
Join Date: Mar 2002
Location: Los Angeles
Posts: 31
My previous post does not read right: it is a reservoir volume per week during 4 weeks per year (more/less if you want to be cleaner) My experience then seems to be that the accumulation rate of contaminants is more than offset by this renewal method.
__________________
Adam Reinosa
91 300E 190K
81 911SC 210K
61 MB 190C 90K - sold...sigh.
70 914-6 - DUI victim - sigh
911T - Fire victim
Renault Dauphine '62
67/Cougar GT;70 Challenger 440 Mag
www.wetstart.com - OEM future option coming soon
Reply With Quote
  #6  
Old 03-17-2002, 10:08 PM
Q Q is offline
Registered User
 
Join Date: Aug 2000
Posts: 839
I don't know guys, that sounds like changing your underwear one tread at a time. You'll always have stanky drawers.
Reply With Quote
  #7  
Old 03-17-2002, 10:37 PM
Registered User
 
Join Date: Jul 2001
Location: Western Michigan
Posts: 1,080
I guess the point here is to maintain the cleanness of the fluid once it is clean.

Once the fluid is fresh, change more frequently than recommended, i.e., twice a year rather than every two years so the contaminants and water cannot reach damaging levels.

So one changes half the underwear every 6 hours instead of the whole underwear every 24 hours. That way the underwear stays clean.

Last edited by loubapache; 03-17-2002 at 11:00 PM.
Reply With Quote
  #8  
Old 03-17-2002, 11:17 PM
Registered User
 
Join Date: Mar 2002
Location: Los Angeles
Posts: 31
This periodic replacement is so easy and painless that for me it just makes sense and it seems to be working. With the time and effort saved I get to do other maintenance chores. A small pump with long wires makes this work a 3 minute affair every time. Later.
__________________
Adam Reinosa
91 300E 190K
81 911SC 210K
61 MB 190C 90K - sold...sigh.
70 914-6 - DUI victim - sigh
911T - Fire victim
Renault Dauphine '62
67/Cougar GT;70 Challenger 440 Mag
www.wetstart.com - OEM future option coming soon
Reply With Quote
  #9  
Old 03-18-2002, 12:34 AM
Registered User
 
Join Date: Mar 2002
Location: Vancouver's wet coast
Posts: 19
Lightbulb Surgical Hose

What a gret idea replacing the break fluid. You could use a foot long piece of sugical tubing over the bleeder screw to catch in a jar, this will keep bf off the floor and easy to dispose of.
__________________
1987 560 SEL
"A study in the Washington Post determined that women were better communicators than men, I just want to say to the authors of that study "Duh""
Reply With Quote
  #10  
Old 03-18-2002, 01:44 AM
MikeTangas's Avatar
Senior Member
 
Join Date: Apr 2000
Location: So. Cal
Posts: 4,430
Whether I'm pressure bleeding or using the two person method, all my fluid is collected in a jug. I have clear tubing with a rubber boot that fits snugly on the bleeder screw. First I crack the screw to get it loose, then gently tighten, attach the hose and start bleeding by opening/closing the screw using a 9mm box wrench. Then clear tubing allows you to see when the clean fluid is coming through the lines.
__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.
Reply With Quote
  #11  
Old 03-18-2002, 07:10 AM
LarryBible
Guest
 
Posts: n/a
I guess it doesn't hurt to siphon and replace the fluid in the reservoir, but most of the problems result from the gook that collects in the calipers. This gook is not going to rise up through the lines and abs valving and make it to the reservoir. Even if you replaced the reservoir fluid EVERY week, you will still need to occasionally(annually) follow Mikes instructions and bleed the entire brake system.

Good luck,
Reply With Quote
  #12  
Old 03-18-2002, 09:05 AM
Registered User
 
Join Date: Mar 2000
Posts: 17
Thanks for all the info. Where is the pressure bleeder screw and how does this all take place.
Reply With Quote
  #13  
Old 03-18-2002, 01:28 PM
jsmith's Avatar
Ronin
 
Join Date: Aug 2001
Location: At Sea
Posts: 1,729
i want to try speedbleeders. anyone have any comments on those? i am going to do the fluid as soon as it is warm enough. tis the season for brake fluid replacement...
__________________
joE
1993 300e-2.8
- gone now <sigh>
"Do not adjust your mind, it's reality that's malfunctioning"
http://banners.wunderground.com/bann...L/Key_West.gif
Reply With Quote
  #14  
Old 03-18-2002, 04:52 PM
Car Killer
 
Join Date: Jan 2002
Location: Northern VA
Posts: 178
I bought the german auto products power bleeder that you hook to the resovoir and pump up so all you must do is open the bleeder screws at the wheels and wait until it runs clean. I usually change brake fluid with every set of pads, and its never that dirty. I only use Castrol GT-LMA dot-4 brake fluid.
__________________
Matt
2003 Jetta Wagon TDI 145,000MI
1999.5 Jetta TDI 287,000MI
2001 Suzuki SV650S 26,000MI
2008 Yamaha Vino 125 11,000MI
http://www.crazymatt.org
Reply With Quote
  #15  
Old 03-18-2002, 06:20 PM
Registered User
 
Join Date: Jun 2001
Location: California
Posts: 327
Power bleeding is the way to go. Do a search on "pressure bleeder" and you'll find Donald's instructions on how to build your own "el cheapo" pressure bleeder. I just built mine last week and I made a few modifications. I'll report on it's performance after I put it through the paces...

__________________
D.H.

04 ML500
02 E430

Experience is something you don't get until just after you need it.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why should I flush my brake fluid every year, you ask? 240 Ed Diesel Discussion 93 03-13-2007 12:29 PM
SAFE brake fluid level for pad/rotor change DuckMuck Tech Help 16 04-07-2003 04:19 PM
Disappearing brake fluid rickjordan Tech Help 12 01-31-2003 08:13 PM
Brake Fluid: Synthetic vs. Non-Synthetic tcane Tech Help 7 09-08-2001 08:21 AM
changing brake fluid engatwork Tech Help 2 08-11-2000 08:18 PM



All times are GMT -4. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page