Alignment Spec for 89 300CE
 

I just had my car aligned after changing my tired shocks and struts with Bilstein sports. I have H&R springs that were in the car when I got it 2 years ago. Last year, an alignmnet was done without any problems noted. Today however, it appears I have a lot of negative camber on my front and rear wheels. Here are the readings:

Front Left: Front Right:
-1.6 Camber -1.1
10.9 Caster 11.0

Rear Left: Rear Right
-3.1 Camber -2.9

The fronts failed per alignment spec, and the weird part was there was no alignment spec range for the rear camber.... what gives?

I did a search but could not find anything regarding the factory recommended specs. Regardless, would the current alignment settings be okay or should I get a camber correction kit?

MB alignments are height dependant! That is why "most" alignment shops don't have specs for rear camber.
There are specs but they are different for different ride heights & must be programmed into alignment depending on measured ride height.
The readings you have are for a VERY lowered car!
Less than -2 deg of camber won't cause excessive tire wear, but the -3 deg in the rear will cause tire wear.

Thanks, Doc. That being the case, it appears I still have too much neg. camber for the rear tires. What can I do now, install a camber kit? Is there even one for the rear?