Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-20-2002, 04:34 PM
Registered User
Join Date: Mar 2002
Location: San Diego, CA
Posts: 3
'91 560 SEC Door panel removal

Can anyone advise me as to how to get this door panel off? I have to replace the window regulator and can not get it off. I have removed all the screws and the door handle screws but I can not get the actual panel off. Am I missing something?
Any help would be appreciated.
Glenn Miller
Reply With Quote
Old 03-20-2002, 06:23 PM
Registered User
Join Date: Jun 2001
Location: California
Posts: 326

If it's like the 300E, you have to unhook the door pull rod and slide the small handle assembly forward and out. For me, this was the key to get the door panel to come off. The panel has clips that require you to lift it up and out.

Definitely search the archives as well for more detail. Good luck.

04 ML500
02 E430

Experience is something you don't get until just after you need it.
Reply With Quote
Old 03-20-2002, 07:38 PM
Posts: n/a
I can't take credit for this but don't remember where I originally got this info from.

1. Unscrew and remove the door lock plunger
2. Remove the cast metal plate around the door striker
3. Remove the 2 visible screws holding on the arm rest. There is a third one holding the top of the armrest which you can't see yet.
4. Using a small flat screwdriver, carefully prise out the plastic cover under the door opener lever. (The frame around it is actually cast metal, but it looks like plastic)
5. Remove the screw that you now see. It holds on the metal frame around the opener lever. Remove the metal frame.
6. The third screw holding the top of the armrest is now exposed. Remove it and the armrest.
7. Now comes the part where you can remove the door upholstered cover and liner. The cover is actually hanging on special plastic clips which pull it snugly into the door frame. Grip the base firmly on both sides and lift upward, then outward. You will find it comes off quite easily.
8. The lamp at the base of the door will be connected with wires. Slip off the connection, and the cover is free.
9. Next, carefully remove the plastic liner. Try not to tear it. If it is in bad condition, use the old liner as a template to make a new one. (Stick it back with silastic/silicone sealer)

Hope this helps.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
560 SEC Spring Conversion Possible??? grey560 Performance Paddock 2 04-24-2005 01:39 AM
Stunning Collectors 1987 MB 560 SEC Luxury Coupe hoover Mercedes Cars For Sale 13 01-17-2005 12:05 PM
Differential Gear swap 560 SEC chinook Tech Help 0 11-06-2003 10:54 PM
500 / 560 sec wallpaper Diego Off-Topic Discussion 1 08-01-2002 12:52 AM

All times are GMT -4. The time now is 10:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page