Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-21-2002, 06:34 PM
Registered User
 
Join Date: Aug 2001
Location: Santa Maria, CA
Posts: 49
Question Replacement of Speedo Cable on 190E

Sorry about this question, but I could not find anything helpful using the search function--

I want to replace the speedometer cable. I tried to get at the connector at the back of the instrument panel (from below) but I am stymied by a large hose for the Climate Control vent at the left of the dash panel. Cannot figure out how to disconnect it and get it out of the way.

I can disconnect it from the fitting at the left side of the center console, but can't move it anywhere useful. Cannot figure out how to disconnect it (and reconnect later!!) from the elbow at the vent. The elbow end is way up in the innards of the dash.

Any suggestions from someone who has done it?? Can I remove the left hand vent, pull it out of the dash and disconnect the hose there??

I would rather not pull the instrument cluster in this process, as I have wood cladding on the dash that might make removal of the cluster problematic.

Help!!

Tom Elerding

Reply With Quote
  #2  
Old 03-21-2002, 09:07 PM
Live to Learn
 
Join Date: Mar 2002
Location: Raleigh NC
Posts: 145
Tom,
The cable really needs to come out and go back in from the inside of the car.The cluster really needs to come out.
The cable is not long enough to allow the cluster to come out enough to unscrew the cable,so you have to disconnect it from the trans first.
Brian.
__________________
Mercedes Benz Master Tech
ASE Master Technician
Diagnostic Technician
Owner of "Behind the Star Inc."
Raleigh NC.
www.behindthestar.com
brian@behindthestar.com
Reply With Quote
  #3  
Old 03-22-2002, 11:20 AM
Registered User
 
Join Date: Jun 2000
Location: Tucson, Arizona, USA
Posts: 180
... and be very gentle removing the old cable from the tranny--I broke the aluminum casting replacing my speedometer cable last night Wishing you better luck, Andrew Seidel.

__________________
86 560SEC
85 500SEC Lorinser
83 300D Turbo
75 240D
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedo cable question 230/8 Mercedes-Benz SL Discussion Forum 0 06-14-2004 10:57 AM
190E clutch replacement. Any tips? Greg in Oz Tech Help 6 04-29-2003 07:51 PM
Strut Replacement for 190e Sicangu Oyate Tech Help 3 12-23-2002 02:35 PM
kick down cable adjustment on 86' 190e kjsabat Tech Help 1 11-10-2002 02:46 PM
Speedo cable replacement iozero Tech Help 1 10-14-2000 05:38 AM



All times are GMT -4. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page