W126 Window Switch Wiring Diagram
 

I picked up a 300SE (with 112k mi) and am finally getting to fixing a few things.

The rear passenger window wasn't working, and I was told it needed a new regulator. Ordered one with a motor, so I'm trying to install it. Once I got the door panel off I saw that all of the wires were disconnected from the switch and pushed back in to the door for some reason. So, I'm looking for a diagram that shows me in which order the wires should be pushed back on to the switch.

There's a bunch of wiring diagrams out there, but they reference wires that are different colors from my car (89 300se).

I thought I'd be clever and pull the switch from the driver rear door and just match them, but.....of course.....they are totally different colors.

So, does anyone have the diagram, or a picture of how the wires should be pushed onto the switches terminals?

I've got 5 wires: solid brown, blue/white stripe. solid green (motor), solid black (motor), green/red stripe, solid grey (with an "8" band on it).

Any help appreciated....




Craig

Pin 1 - Solid green -> motor
Pin 2 - Solid Black -> motor
Pin 4 - Solid brown -> Safety switch (Front console)
pin 3 - Green/red -> Pin 1 - window switch (Front console)
pin 7 - Blue/white -> Pin 2 - window switch (Front console)
58D -Grey -> illumination window switch (Front console)


Rob