|
|
|
|
|
#1
03-22-2002, 08:22 PM
|
||||
|
||||
|
Help! ML-320 Oil filter
I'm changing my oil for the first time with my ML, everything was going smoothly until I pulled out the oil filter. Not only did the oil filter come out, but also this rod looking thing that is attached to the oil filter, and seems to go through the filter. I can't seem to figure out how to get it off the oil filter? It seems to be attached to the top where it has a weird looking crown, and the bottom of the filter, where it has a couple of gaskets, which are the same ones that came with my oil filter kit, so I assume they need to be changed. Anyway, please enlighten me for I need to drive my car tomorrow. Thanks, Al
__________________
2012 550CLS 1982 380SL 1985 300D 1998 ML-320 1997 E-320 1984 380SE 
|
|
#2
03-22-2002, 08:36 PM
|
|||
|
|||
|
Go to the DIY section on this site, it will tell you how it all goes together. Basically all late model cars, have the same assembly type, just some use different filters.
Regards Col Tigwell Downunder
|
|
#4
03-22-2002, 09:26 PM
|
||||
|
||||
|
Or if you want an actual answer: Just pull the filter off the rod-thingy in the middle. Yes, replace the rubber o-rings.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| oil change | wyoo | Tech Help | 43 | 03-29-2017 02:54 PM |
| use spin on oil filters to replace fuel filter? | odie | Diesel Discussion | 23 | 10-25-2009 01:47 PM |
| Oil Changes: How the different sexes do things... | moparmike | Off-Topic Discussion | 12 | 02-08-2007 10:14 AM |
| The oil debate again What do you think of this | dpbrowne | Diesel Discussion | 101 | 04-01-2005 02:33 PM |
| different part # for oil filter? | mbc | Tech Help | 7 | 09-11-2002 09:48 PM |
Linear Mode
