|
|
|
#1
|
|||
|
|||
Upper guide, and timing on 300DT2.5
Hi everybody,
Yesterday, I did my timing chain, after puting the crank at DTC, I put the camshaft in the right position, put the tensioner.The IP is 15° After DTC "compression phase". All is allright, but I did that whithout the upper chain guide and vaccum pump. when I turn the crank slowly, all is OK. when I do that quicly the crank stops after some turns "the chain loose tension between the IP & the cranck" So I need to turn slightly the crank anticlockwise. and go again whith rotation in the good direction. the timing still be OK after more than 20 rotations. NB: I tryed the timing without : head gasket, upper guide,vaccum pump..... I did the timing just to put marks on the IP before its removal. 300 DT 2.5 1991 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
timing chain - upper guide rails.. ? special tools | rsmcmahon | Tech Help | 3 | 01-25-2010 11:00 AM |
190e 16v Timing Chain Cover guide | Dan Rotigel | Tech Help | 1 | 10-02-2006 07:32 PM |
Info on how to replace timing chain tensioner & upper chain guide | bodyart27 | Diesel Discussion | 11 | 10-15-2003 04:53 PM |
603 upper chain guide and cam timing | sixto | Diesel Discussion | 5 | 11-17-2002 09:16 PM |
Timing Chain Guide rail near disaster | Brant Pope | Tech Help | 0 | 05-30-2002 02:38 AM |