car his minimal power when accelerating. on sine occasions I will accelerate and have my foot all the way c down and the rpm well rev up but I will only be stuck at about 45 mph. My take off is really sluggish as well. car bogs down and will only go about 20 mph even when flooring it. It does eventually go faster but I'd say my 0-60 time is at least 20 seconds.. Anyone got any ideas?

__________________

1990 190E 3.0L

is this on your 2.6?

plugged cat?

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

yes 2.6. don't think it's the cat.....seems like something else, but not sure what. transmission maybe? engine?

__________________

1990 190E 3.0L

hmm why don't you think its the cat?

how does it rev in neutral?

Any fault codes from the CIS x11 port?

observe throttle linkage in the engine bay? does it actually move all the way?

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

it revs fine in neutral. I get fault code 11 and 17. cat is pretty new and plus I thought I had a problem with cat before and I had it checked about 2 months ago

__________________

1990 190E 3.0L

duty cycle measurement at the x11?

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

I have mine based on voltage.....outs between 4.6 and 7.1

__________________

1990 190E 3.0L

I meant 6.4 to 7.1

__________________

1990 190E 3.0L

This statement here sounds like excessive slip, pointing to a transmission problem. First step would be fluid level check.

__________________
Prost!

Any issues with the transmission prior to this event?

Does it shift gears? How poor or how well? Quality of the shifts?

Any chance of a video of all of this? Your descriptions will pale in comparison to a video.

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

Checked fluid level while car was idling at operating temp and sure enough the level was low.....added some fluid and everything seems to be back to normal, won't know for sure until I get a fresh start tomorrow. Interesting that the fluid was low; My trans doesn't leak and I just had a used one put in back in December.

__________________

1990 190E 3.0L

RPMs winding up real fast and smooth but the car not going anywhere = tranny problem?

pretty much....and I just had mine done in December, but it ess just low on fluid

__________________

1990 190E 3.0L

Problem was a faulty throttle microswitch (part number 0025456814). Replaced part, now everything is fine.

__________________

1990 190E 3.0L

I finally got mine to take off quick from the line when warm. I think it was really a collection of things that were old and messed up. I'm not a fan of "throwing parts" but with the age of these cars they do seem to need full rebuilds.