1987 260 Fuel Distributor Question
I have no fuel making it to the injectors. I removed the fuel distributor and could not blow through the screen on the inlet. Does anyone know if the screen/inlet has a part number or if I can drill it out?
I imagine there should be fuel pumping out each of the six holes for the injectors I had none. Am I correct? I can't put it together until I get another o ring for it to test. Thanks |
fuel pump relay
Test or jumper your fuel pump relay pull it out and jumper pins 7 & 8 then push on the air mass plate and see if it starts sending fuel out the injectors.
|
fuel dist
also to get fuel to pass thru the fuel dist you have to push up on the plunger on the bottom to open the flow.
|
Thank you sir. Will test today.
|
All times are GMT -4. The time now is 08:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website