The races and bearings usually come machined together, I doubt you will find the races for sale by themselves.

If VERY careful, you could possibly dremel through the race with a cutting wheel then pop it out....

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)

Both bearings only cost me around $20. So that's not a major expense.

Someone in another forum said that most machine shops have a tool that can pull the race out. So I'm going to a local machine shop this morning to see if they can do it.

I'll post the results of that trip later on in case anyone makes the same mistake in the future.

Thanks again for the response.

__________________
1981 380SL
Chassis: R107.045