Front crank seal on 95 E320 104.992 engine Hub replacement needed?
I have replaced quite a few front seals on OM617 engines, and I always replace the race, since it develops a groove. I am about to replace the seal on this 104 engine and it uses a hub to rub on the seal. Should I replace the hub? its kind of expensive, but I only want to do this job once.
|
CR , FelPro and others make a "reddy sleeve" to fix the groove, they are in the $ 20 range for common sizes. Another fix is not to press the seal in as far as the old one, just be sure it is square to the bore. ( maybe 1/8" short of bottom )
I need to do the front seal on my 97 C280 some time over the winter. |
I believe there are 3 different sort of seals available just for this purpose. They are made to ride on a different part of the hub.
|
All times are GMT -4. The time now is 01:19 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website