|
Function of Elmwood Temp Sensor on Blower Motor Box W116 Bypassed?
1 Attachment(s)
I discovered a tiny temp sensor installed next to the ACC blower motor on my 1980 w116 450SEL that had been bypassed. I'm wondering what the function of it is and if I should try to replace it?
Marked: "Elmwood Sensors 2455R 10/6 AMP 250v 3455R95-54, etc. " Please see photos to follow: Attachment 124050 Photo is sideways |
More photos
1 Attachment(s)
|
Last photo
1 Attachment(s)
The other side:
|
That is a "snap disc" bi metallic switch that turns on or off depending on temperature. I'm not sure what it is for either. Is the AC factory install or dealer AC?
The form factor of the switch is super common and still used today. In fact, the 2455R series comes up as a Honeywell part, see links below then look for your part #, it should be there somewhere. 2455R-100-89 HONEYWELL S&C Temperature Switches | 98K8376 | Newark element14 www.farnell.com/datasheets/93692.pdf sensing.honeywell.com/product-page?pr_id=53358 |
| All times are GMT -4. The time now is 05:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website