Hello to everyone.
Never had the need to post before as I have always been able to find the answer in another thread.
My 300SE won't start.
There appears to be good spark.
The engine does fire when I spray starting fluid into the air intake.
There is no fuel getting to the injectors.
There is fuel getting to the fuel distributor but not coming out injector ports.
The fuel pump activates and delivers what looks to be a good quantity of fuel.
When the air flow sensor flap is depressed while the engine cranks there does not seem to be an increase in resistance.
Any suggestions would be greatly appreciated.

Thanks
Alby

Have you tested fuel pressure, are both pumps running? Changed fuel filter? (CAREFUL you don't blow up the car/yourself as gas gets everywhere)

Could be a bad fuel distributor but it sounds like a low-pressure condition if it came on suddenly. One pump may have failed.

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)