Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-15-2014, 09:54 PM
Registered User
 
Join Date: Sep 2014
Posts: 10
W124 Sunroof tilts and closes, but won't slide open

Just bought my first Mercedes. 1994 E420. I'm pretty handy with a wrench, but am coming from newer VWs and don't know where to start with this Mercedes.
The problem: the sunroof tilts and closes fine, but when it goes to slide back, the passenger side drops but the drivers side doesn't, when then doesn't allow it to go back. It's like it's getting jammed on something or not getting pulled down like it's supposed to. I've tried the manual way and everything acts the same, tilts fine, gets jammed trying to slide.

Any ideas what it could be? How can I get a better view as to what's going on? I tried "helping" it by pressing down on the rood while trying to open it, but it didn't help and I was afraid of breaking it. Any insight is helpful

Reply With Quote
  #2  
Old 09-17-2014, 09:04 PM
Registered User
 
Join Date: Sep 2014
Posts: 10
Any ideas?
Reply With Quote
  #3  
Old 09-18-2014, 04:35 PM
pwogaman's Avatar
Senior Member
 
Join Date: May 2003
Location: Northern, Virginia
Posts: 2,034
Make sure the seal around the top is fully in the groove. If it works out be even as much as an 1/8" towards the rear it can prevent the back of the lid from lowering. You should be able to check with the lid tilted upwards.
__________________
http://i284.photobucket.com/albums/l...aman/Fleet.jpg

Peach Parts W124.128 User Group.

80 280SL
85 300SD
87 300TD
92 300D 2.5 Turbo
92 300TE 4Matic
Reply With Quote
  #4  
Old 09-18-2014, 09:00 PM
Registered User
 
Join Date: Feb 2007
Location: los angeles
Posts: 814
Your problem sounds like a bad lift bridge, should replace both while doing the job about 85-100 per side ,need to be able to slide roof almost all the way back to repair,inner panel only comes out when panel rearward, then once panel liner is out you can remove screws that are hidden
Reply With Quote
  #5  
Old 09-19-2014, 08:48 AM
Registered User
 
Join Date: Sep 2014
Posts: 10
The seal seems fine. I guess the lift bridge is all that it could be. I'll probably just leave it be for until until I feel ambitious about trying to get moving the sunroof back, since I have yet to be able to.
Reply With Quote
  #6  
Old 10-16-2014, 09:56 PM
Registered User
 
Join Date: Sep 2014
Posts: 10
Finally found a W124 in a local junk yard. Grabbed the sunroof lift arms out of it and finally go to taking my sun roof off. Sure enough one of mine was cracked which was causing it to get caught up. Wasn't nearly as bad as I thought it was going to be. Definitely learned some stuff on the junk yard car, and learned more stuff on my car. Messed up my headliner piece a bit, but not enough to notice unless you're looking for it. Could definitely to it again without messing anything up now.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page