|
|
|
#1
|
|||
|
|||
Self-Leveling Adjustment 16V
Hi,
Does anybody know how to properly adjust the height of the rear self leveling suspension on a 16V. Do I adjust the length of the turn buckle or do I loosen the pinch bolt on the sway bar? I understand that this valve is some sort of three way valve and I would hate to mess up the neutral setting (ie not filling or draining). Any help would be appreciated. I want to raise the rear a little bit. Thanks! |
#2
|
|||
|
|||
Lengthen the rod to raise the rear end. There are "jam" nuts both right hand & left hand thread that you need to break loose to adjust.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2.3 16V self leveling suspension troubleshoot | Matt Smith | Mercedes-Benz Performance Paddock | 5 | 11-03-2004 02:12 PM |
My 16V hesitates after Valve Adjustment | Randall Kress | Mercedes-Benz Performance Paddock | 0 | 07-31-2004 07:31 PM |
2.5 16v idle adjustment and cold start | Uk Merc Man | Tech Help | 4 | 03-10-2004 04:46 PM |
2.5 16v Tappet Adjustment? Worse Case Senario? | Uk Merc Man | Tech Help | 6 | 12-08-2003 01:08 PM |
16v supension self leveling | daveCT | Tech Help | 6 | 06-04-2003 02:41 PM |