Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-18-2014, 02:09 AM
Old School Mechanic
 
Join Date: Dec 2006
Location: Auburn California
Posts: 127
Fuel Trip out of balance

C320, Getting over rich on bank 1. Live data showed -4 to -5 long term on bank 1 but bank 2 was 0 to +1. On urgent acceleration, short term 1 would go to max, accel limiting came on w/eng light.

I guessed one or 2 injectors were at fault so I swapped 1 and 2 banks. cleaned the seals and spayed out the input side with brake cleaner, silicone lubed the seals. no big deal, just sprucing and dressing be fore installing.

To my surprise, the problem did not switch sides, but it did get a little better: -3 to -4 long term on 1 and +1 on 2. Stomping it did not throw an error and did not get to rpm limiting. I didn't rev too far since i wasn't happy with the -3 to -4.

So what should I try next? what would cause the right side to pump in too much fuel while the left side is a little lean? Could it be a sensor issue?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page