I did the water pump and a new belt. After I did the belt and test drove it I was hearing a clicking sound in drive and reverse while sitting on the brake. While moving and while in park or neutral it does not happen. So with someone in the vehicle with foot on brake and vehicle in gear, I put a 17mm socket and ratchet on the tensioner and tugged both ways ( releasing tension and appying more tension ) and the noise went away while tugging on it. So I determined it was the tensioner. BUT NO!!!!! The noise came back and so I changed it out again. once the car warmed up the noise came back again. I am not buying the bull **** that it is 3 bad tensioners!!!!! do you have any clue about this? Have you come across this problem before?