1994 W124 16PIN DIAGNOSTIC PUSH BUTTON
I have a e320 1995,that has a surging idle and eventually will surge and die at idle,cold.I used the 16 pin connector next to the battery with the push button to read the codes.If I press and hold for 2-3 seconds the button,the LED will blink 10 times,then press again will blink 16 times,then again 24 blinks,what are those codes and how to erase them first,then read them again?,car had a dead battery and I just want to erase the codes,drive the car and then read them again to start and diagnose the idle issues.Any help will be appreciated.
|
here is a list of all the codes for the w124.
http://www.mercedescodereader.com/uploads/2/6/0/4/26049090/mercedes_error_codes.pdf I'm not familiar with those that you listed off the top of your head, as I have a '93 and they use a different diagnostic system for code reading. The list is short though, best of luck! |
All times are GMT -4. The time now is 05:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website