Did a search and nothing jumped out at me. Had a problem with my '87 300 SE blower fan. Some how the smoke got out of it and the fan will not run. A quick check of the books and I think the fan unit comes out from the engine compartment/firewall side of things. Am I headed in the right direction?

Anyone have any experience with this and some links to the procedures?

Thanks.

Doug

__________________
1988 300SE 83K+
1991 350SDL 283K+

Passenger footwell under dash.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

Thank you. For some reason I can't find the 300 SE model in the opening page. Must not e holding my mouth right.

__________________
1988 300SE 83K+
1991 350SDL 283K+