I am in the process of replacing the head gasket on my 1988 190E 2.3

I've removed the head bolts...all 10 plus the four small ones in the front.

exhaust manifold is separated...intake manifold as well.

Chain tensioner and chain guide is out as well. Chain and sprocket are marked.

Trans and oil dipsticks are off as well.

HEAD WON"T COME OFF!!!!!!!

I've tried tapping the head...nothing!...a little harder...nothing.

I am tired and going to bed. If anyone out there can think of a chant? a dance?

Please get back to me. I need to get this car running.

I thank you all in advance.

__________________
I have never met a man so ignorant that I couldn't learn something from him. -Galileo Galilei, physicist and astronomer (1564-1642)

I dont know but is that head pinned to the block ? If so, it has to come straight up.
Might consider driving a putty knife between the block and the head.

__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."

Been there. Different car. It feels crazy right? I had forgotten two down in the timing chain assembly.

Here is a good write up. Pelican Mercedes-Benz Tech Article - Mercedes Benz Head Gasket Replacement - 190E, W124, W126, W201, W123

__________________
Prost!