|
|
|
#1
|
|||
|
|||
86 190e 2.3-8v Specs PLEASE!
I am looking for the following specs for the 2.3L 8V engine.
USA model Automatic Transmission 1. Compression Ratio 2. Intake and Exhaust Valve Diameter. 3. Connecting Rod Ratio 4. Automatic Trans Gear ratios 5. Rear End Ratio. Thanks in advance.
__________________
WARNING: Bastard Mercedes Builder/Tuner Sorry if I don't answer your email or questions I don't check here too often. I am normally on the 190revolution.net board. Thanks Last edited by Speedtek; 04-30-2002 at 04:20 AM. |
#2
|
|||
|
|||
Compression ratio on the 1986 engines is 8/1, 1987 & later are 9/1.
Tge rear end ratio on the 1986 car was 3.27/1.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Thanks! Got More?
I still need the following if anyone knows???
2. Intake and Exhaust Valve Diameter. 3. Connecting Rod Length 4. Automatic Trans Gear ratios THANK YOU
__________________
WARNING: Bastard Mercedes Builder/Tuner Sorry if I don't answer your email or questions I don't check here too often. I am normally on the 190revolution.net board. Thanks |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|