My last Getrag 717.400 five speed. Has a few issues ...

I need to remove the broken speedo cable. Here's some pictures.

I do not want to take anything apart.

I was thinking of getting a wire brush and drill, and cleaning it out like crazy. Then, getting a bolt, washer, and nut and JB welding the bolt inside the broken speedo cable. Then, after it dries over night, I would tighten down on the nut which would force itself against the housing itself, with the force pulling the broken off speedo with it. Same theory as a hub puller.

Anyone have this issue or ever fixed it?

Second problem is that one of the dogears broke off. I am thinking I will need that for the muffler hanger. I think the only solution is grabing one at the yard and carefully JB welding it.

Attached Thumbnails