|
|
|
#1
|
|||
|
|||
Door Interior Popping off '86 W124 300E
Folks,
I noticed that after I had some folks in the ride in the back of my 300E, (which is in great condition) after they closed the doors, both of these items popped off. I figure due to age they are just not staying on. Has anyone had this problem? Thanks, FG. |
#2
|
|||
|
|||
here's why
The edges of the door panel that this trim goes into need to be pushed in behind the flanges of black base at the top and bottom that this trim piece snaps into. If not, the door panel material is in the way and will not allow the trim piece prongs snap into place against the attachment points. Use the plastic equivalent of a putty knife to carefully push the edges until they are behind the flanges.
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather 90 300SEL 214k Pearl Black/ Alto Grey/Black Leather Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio |
#3
|
||||
|
||||
Easy job ,just look at the two parts you will see how they are attached .
|
Bookmarks |
|
|