|
|
|
#1
|
|||
|
|||
1994 E 320 Drivers Windows Noise HELP Please
Just noticed when lowering/raising window just when it it at the top it makes a popping sound as if the bracket holding the glass in place is loose. Is there an easy way to fix this? How do I pop the door cover off to check? Any help would be sincerely appreciated.
|
#2
|
||||
|
||||
Look in D.I.Y. for door check strap replacement. It explains the removal process for the door panel. You will probably find you need to replace the window regulator. I suspect that popping noise is the pinion gear turning on the "rack" gear of the regulator.
__________________
Jim |
#3
|
||||
|
||||
It happenned to me!
The last few teeth of your window regulator are gone. Change it as soon as possible or your window motor will go as well. It is a DIY'er job if you are mechanically inclined.
Good luck!
__________________
J.H. '86 300E |
#4
|
|||
|
|||
Window regulator replacement
Thank you Engatwork and J.Hidalgo for your quick responses! The responses are sincerely appreciated. Curious if its a part that's usually in stock at MB and an approximate cost to purchase...??
|
#5
|
||||
|
||||
Check with FastLane!
They have all the parts you need and, cheaper than any dealership, delivered to your door.
Just click on the block on the top of this page. Good luck!
__________________
J.H. '86 300E |
#6
|
|||
|
|||
Regulator and Installation
Last edited by petec; 05-06-2002 at 11:22 PM. |
#7
|
|||
|
|||
Regulator repaired
Thanks to all for your expert diagnosis. I had the window regulator repaired this morning. You guys were right on the mark. There were about 3 teeth chewed up on the old regulator. It took about 2.5 hours to repair at a cost of $130. Total cost was $248. You guys are GREAT!
|
Bookmarks |
|
|