|
|
|
|
|
#1
05-09-2002, 07:08 PM
|
|||
|
|||
Transmission modulation adjustment
Hi Guys
My mechanic adjusted the Auto trans Mod. on my 280se 126 but now its a bit too snappy. Could someone please advise me how I go about backing it off a touch. Thanks Mark 
|
|
#2
05-09-2002, 07:19 PM
|
|||
|
|||
|
To make the transmission shift harder go clockwise with the adjustment, to shift softer go counterclockwise. If you back it out too much it will slip.
__________________
euro 287 Mercedes Technician 7 Years (retired to Hyundai) 2000 Dodge Durango 98 Mazda truck
|
|
#4
05-09-2002, 07:47 PM
|
|||
|
|||
|
Underneath drivers side on tranny, it will be a red ,green or whatever color valve with a vacuum line going to it. There is a blck cover ( dont break it) its rubber. Remove it and you will see a metal piece in there , carefully pull out the metal piece enough to turn it . Turn in direction wanted and put the rubber boot back on.
__________________
euro 287 Mercedes Technician 7 Years (retired to Hyundai) 2000 Dodge Durango 98 Mazda truck
|
 |
| Bookmarks |
|
|
Linear Mode
