Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-11-2002, 04:55 AM
Brant Pope
Guest
 
Posts: n/a
Oil Pressure delay 500SEC

Just in the last couple of weeks I have noticed that upon a cold startup it takes several seconds for ANY oil pressure to registar on the gage. As soon as it does, it always remains above 2 bar and 3 at anything above idle. This is on my 1985 500SEC with 115k miles. I know it is not a gage problem sice I had my wife start the car while I watched the camshaft oiler tube through the removed filler cap. Sure enough it took about 6 seconds to see oil. The car is now in the garage until I find the problem. My research suggests that the oil filter housing is draining empty as the car sits and therefor must be filled up by the oil pump first before I get any oil to the engine. I pulled the oil filter housing assembly off the block and see the little spring loaded check valve in there. Can this little sucker be bad? Can I get new parts for it? Could anything else cause such a prolonged delay in oilpressure buildup?...collapsed lifters? ...bad oil pump? ...Any ideas? Thanks, Brant
Reply With Quote
  #2  
Old 05-11-2002, 03:28 PM
roas
Guest
 
Posts: n/a
These go bad eventually in the M119 engine in the 500E, this could be your problem as well.

500E still Racka Racka's on cold start up????
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page