|
|
|
#1
|
|||
|
|||
Fan clutch
!992 500SL I need to replace the fan clutch my existing fan clutch is part # 6299-05154116 its not the same clutch they show on the tech help DIY forum there seems to be a hex bolt in the center instead of the usual four my question is is this a right hand thread or left hand thread ? I've tried removing it by turning counter clockwise it will not break loose reason for my question L or R thread anybody out there know anything about this
I want to use 2 electric fans should they be placed on the inside of radiator or outside PULL or PUSH ? Last edited by Rocketman500SL92; 07-17-2016 at 02:33 AM. Reason: need to know push or pull on electric fans |
#2
|
||||
|
||||
fan clutch
To find out the direction look at the fan rotation .If its going anticlockwise then open it in the other direction If it was to be removed in the same way as it rotates it will fall off.
|
#3
|
||||
|
||||
Quote:
Just lock the clutch in place and break the center hex bolt. It rests in the center of the bi-metallic strip. And yes, there are four, 10mm botls, those actually hold the fan blade to the clutch. I am selling a fan clutch complete with the metal blades for $75 shipped. It's the larger one on the right. I have the center bolt for it as well. PM me if interested.
__________________
1990 190E 3.0L |
Bookmarks |
|
|