|
|
|
|
|
#1
11-02-2016, 02:57 PM
|
|||
|
|||
|
om603 lift pump nuts
Does anyone know what size the nuts are on the om603 primer lift pump? I believe mine are worn. New lift pump installed but one nut won't tighten.
|
|
#2
11-02-2016, 04:21 PM
|
||||
|
||||
|
This forum specifies gasoline engines, ... you might do better posting this in the DIESEL forum.
__________________
 Gone to the dark side - Jeff
|
|
#3
11-03-2016, 05:59 AM
|
||||
|
||||
|
Wild guess - M8 coarse thread...
...sorry but you'll have to check for yourself. ######## I can give you some better advice, however, an assortment of high tensile (not the soft cheap junk!) zinc coated steel nuts, bolts and washers is a great investment for any DIY mechanic - saves a lot of cocking about.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior  Don't leave that there - I'll take it to bits!
|
|
#4
11-03-2016, 10:20 AM
|
|||
|
|||
|
if there small =6x1.00mm or large 8x 1.25mm
|
 |
| Bookmarks |
|
|
Linear Mode
