Post 8 speaks of grease coming out of the bearings seal, this is normal to some extent.

The bearings seal is more of a thin rubber flap that will let an initial amount of grease out then a slow leakage over the life of the bearing.

Ball bearings are not packed full and the fill ratio depends on how fast it spins in use. The faster a bearing spins the less grease volume that can be tolerated.

I found the bracket at MBoemparts.com for $170
I'm sure my local dealer would want more than that for a reconditioned one, but I'll check with them also. It's not cheap but the noise it's making is driving me crazy.

Pelican has our fan bracket 104 200 1328 for around $60: https://www.pelicanparts.com/More_Info/1042001328M253.htm?pn=104-200-13-28-M253&bt=Y&fs=0&SVSVSI=3744

We sell about 60 annually and haven't had any complaints, and it's covered by our two-year, unlimited mileage warranty.

I think that’s what I put on my car. Money was tight. So far no issues. If I had the money I would’ve put a mb part on

__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero

A previous owner installed a Febi fan bracket (stamped "Made in Germany") which failed in 4 years / 40kmi. Photo attached. Depends how often you want to repeat this job. I replaced it with OE/dealer and never had a problem since. Click here for additional photos.

Also - if you do not apply anaerobic sealant on the bolt threads during installation as specified in the FSM (click here), you WILL have an oil leak. The "pro" shop that installed the Febi did not use sealant and it was leaking oil (easy to tell, the bolt threads will be coated with engine oil). The oil leak was cured when I installed the new bracket with correct sealant on the bolts.

YMMV, etc.

Attached Thumbnails

   

__________________
Dave
Boise, ID
Check out my website photos, documents, and movies!

See the link to Pelican's online catalog in our post? Considering they pay the bills that keep the lights on in this forum, Pelican certainly appreciates anyone who encourages buying from their store instead of the competition.

We're happy to help forum DIY'ers find the parts they need on Pelican's web site, which supports the forum and is thus good for everyone involved.

Why is it bad that URO is telling people to buy parts from the owner of this site?

Nevermind

__________________
Doug

1987 300TD x 3
2005 E320CDI

When I say " this site " I mean the owner of this message board. Peach Parts = Pelican Parts.

I wouldn’t say it’s a huge labor job.. changing the fan pulley bracket is maybe 30 minutes working at a snail pace. I’ve changed a lot of mb parts that failed way too early due to inherent problems so I’m open to anything that might work better for cheaper.

__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero

I buy from Pelican,but I'm not putting communist China crap in my benz.

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran

That can be a challenge these days, even with Genuine Mercedes-Benz parts.

Yep evil chinese stealing money from everywhere.

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran

They don't know how to vulcanize rubber,shoes melt in the rain,chinese pig metal,soft as lead

__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran

URO , don't mind our guy, he is mad at the world.

Besides, he would be the first person to buy cheap parts rather than factory parts.