300TE Transmission slipping
Suddently my transmission is slipping between the 2 to 3 gear. Checked the oil level and it appears fine, but I was getting a slow drip for a few weeks before, so I watching the oil level.
Could I be looking at one of the k valve spring or a total rebuild? Enjoy the car, but a total rebuild could be price prohibitive. |
I've been dealing with trans problems here of late. Personally I would drain the converter, install a K1 kit, service the unit, check the cable free play, and bad feed to modulator...... If u had a cable or modulator issue it would affect shift quality in all gears...... Good luck!!!
|
I agree do the a full fluid and filter change incl torque converter, install K1 spring kit and see if that helps. Total cost shouldn't exceed $60 if you can do it yourself. K1 spring kit is easy...just need a screwdriver.
|
All times are GMT -4. The time now is 04:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website