Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-23-2002, 03:37 AM
Registered User
 
Join Date: Sep 2000
Posts: 97
126 Thermostat Housing question

Just replaced my thermostat with a new gasket but now I have developed a leak...seems to be coming from the bolts that hold the thermostat housing to the block (I replaced the old bolts with M6 Bolts x 30 mm -- they are slightly longer and protruding). Are the longer protruding bolts the cause for the leak, or was there supposed to be another paper gasket in between the housing and the block. (I, of course have the rubber gasket on the thermostat).

Thanks for the replies in advance.
__________________
1) 84 300SD 285K+ Miles (Ver Calif)
2) 84 300SD 175K+ Miles (Ver Federal)
Reply With Quote
  #2  
Old 05-23-2002, 08:21 AM
Mike Murrell's Avatar
Registered User
 
Join Date: Feb 2000
Posts: 2,351
If the bolts are longer you may not be snugging down the housing enough. Get the correct bolts.
__________________
Mike Murrell
1991 300-SEL - Model 126
M103 - SOHC
"Fräulein"
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page