|
|
|
#1
|
|||
|
|||
Replacing Sub-Frame Mounts
Someone on e-bay is selling a set of sub-frame mounts for a 560 SL, stating that changing them will restore the ride and quietness of the car when it was new(er). My car has about 105,000 miles on it, and seems to transmit an audible "thump" when going over bumps. Has anyone had experience with ride improvement after changing these mounts?? I'm wondering if it's worth doing.
__________________
M. Sandler 1986 560SEC: 150,000 miles, runs great, but I've got to sell it (too many cars for one man) 1987 560SL: 122,000 miles, used to run poorly, now (thanks to forum), runs great! 1997 GMC Jimmy: Turned out to be a turkey. 1989 T-Bird Super Coupe: 150,000 miles, still runs great. Ford got it right. |
#2
|
||||
|
||||
Noticed any difference in ride???
Oh yea.
Prior to changing the sub frame mounts on the 108 I could feel the front suspention shift with changing direction ie: moving forward after backing. Also had a lot of road noise transmitted through the cabin. When going over speedbumps or pot holes alos had a very pronounced clunk through the front end. While driving the car "wandered", felt a lot like worn king pins on an old straight axle truck. After changing the mounts, road noise is minimal, no clunks or knocks, steering is solid without wander at highway (and higher) speeds. The "how to" for the 108 is documented in the DIY section above. R107's are similar but have two mounts per side and a different means of attachment. While similar yet different, the 108 "how to" should give you a general idea of what is in store.
__________________
Mike Tangas '73 280SEL 4.5 (9/72)- RIP Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum. |
#3
|
|||
|
|||
What exactly are these mounts? Are engine and transmission mounts part of "subframe" mounts? thanks
|
Bookmarks |
|
|