Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-20-1999, 09:32 PM
Mark Elrod
Guest
 
Posts: n/a
1985 500 SEC, Factory injection system has had the lambda system removed and the mixture re-adjusted. Car idles fantastic, runs wonderfully and is so pollution free that the required test facility for our area re-tested the car to confirm that the machine was working! Question is, is there some operational item that could damage my engine or system and when the car is restarted after 30 minutes to two hours it skips badly like a plug or plugs has loaded up with fuel. It clears out in approximately 10 seconds but can be very annoying. Otherwise the car starts wonderfully.

Fantastic forum and now we have a place to ask real questions and get REAL answers.
Keep up the great work, I'm sold.
M.Elrod

  #2  
Old 04-20-1999, 09:58 PM
Benzmac
Guest
 
Posts: n/a
Check your injection nozzles to see if they are made of steel or brass. A standard magnet will determine the metal. If they are steel they will need to be replaced unconditionally. They were updated to brass when MB found out that steel rusts very quickly because of the moisture in most fuels. If your injection nozzles are brass they still could be faulty from everyday corossion. The only other possibility that comes to mind is a faulty fuel accumulator that is located near the fuel pumps.

Thanks for the kind words of encouragement.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Failed emissions: no Air Injection Pump? pistolpete5113 Tech Help 10 11-11-2004 05:07 PM
'87 903.960 Injection Pump, not pumping jhh322 Tech Help 4 08-06-2003 10:44 AM
1990 190e 2.6 air injection code Darin Darlingto Tech Help 5 02-06-2003 04:47 PM
no fuel in injection lines tschepplmasta Tech Help 22 01-29-2003 08:47 PM
Car smokes pretty bad under hard boost 87300SDLTurbo Tech Help 7 11-27-2002 04:47 AM



All times are GMT -4. The time now is 05:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page