|
|
|
#1
|
|||
|
|||
Tool to remove head bolts on M103
What tool fits the head bolts on the M103 engine?
__________________
George Carstens |
#2
|
||||
|
||||
Long one is MB p/n 617 589 00 10 00 and is made by Hazet. Short one is Stahlwille #119 589 00 10 00. I had to have the short one for the E320 rearmost head bolts.
__________________
Jim |
#3
|
||||
|
||||
Technictool.com carries the tool - not sure of the size. They carry a triple-square 8mm-10mm-12mm-14mm. Their parts number is S1054. The MB part number is 617 589 00 10 00. Here's a photo of the technictool # S1054:
http://www.technictool.com/long%20allen%20sockets.htm
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein" |
#4
|
||||
|
||||
I bought mine at O'Reilly's auto parts. It's a size 12 Torx bit, and you need a half inch socket to turn it. Cost about $8 if I remember.
You can probably find one at like an Autozone or Pep Boys as well. ~Paul __________________ '91 300E, 212k miles |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|