PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   No Dip Sticks 2004 E320 4Matic Please Help (http://www.peachparts.com/shopforum/tech-help/386709-no-dip-sticks-2004-e320-4matic-please-help.html)

Targa-NF 06-14-2017 07:46 PM

No Dip Sticks 2004 E320 4Matic Please Help
 
No Dip Sticks 2004 E320 4Matic. I am changing my oil and trans fluid. There is no dip stick for either. I know how to check the oil level using the gauge cluster, but need some info on the transmission. I heard there is a dipstick I can buy. Just wondering if anyone has this dipstick? If so can they send me a :confused:picture next to a measuring tape or give me the measurements for hot and cold transmission fluid levels.
Local Mercedes dealer told me to dump out tranny fluid and just add what came out. I would really feel better using a dipstick. Also the number of liters they suggested were 7 L without draining torque converter and a little over nine if I drain the tour converter. Both sound high. I read a couple of threads saying 3 1/2 to 4 quarts. That sounds more right to me.
Thanks Everyone.

TX76513 06-15-2017 08:55 AM

You probably can purchase here on PP I got one from Amazon. They are not expensive

nulu 06-15-2017 10:19 AM

43 1/8 -1/4 puts you in the middle warmed up , 44 inches at 25 celsius, 42 3/4 max hot 80 celcius, lower the number higher it is

Dmitry at Pelican Parts 06-15-2017 02:40 PM

If you're interested in picking one up, please take a look at the link below. Please let us know if you have any questions!

2004 Mercedes-Benz E320 4Matic Sedan - Engine Tools - Page 7

Targa-NF 06-15-2017 09:26 PM

Quote:

Originally Posted by nulu (Post 3720396)
43 1/8 -1/4 puts you in the middle warmed up , 44 inches at 25 celsius, 42 3/4 max hot 80 celcius, lower the number higher it is

Thanks so much for your reply. Those measurements I'm guessing are from the top of the dipstick down. I have a long dipstick I plan to use. Guessing I should insert it till it bottoms out in the pan. Would you happen to know the measurements from the bottom of the pan up. Like how deep should the fluid be.


All times are GMT -4. The time now is 08:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website