|
|
|
|
|
#1
04-22-1999, 10:26 PM
|
|||
|
|||
|
after a hot start my car shakes a bit
before the RPM/idle goes back to normal 700rpm. i use 10W30 conventional oil. any ideas causing this problem. |
|
#2
04-23-1999, 08:24 PM
|
|||
|
|||
|
Most likely the injection nozzles are leaking down the fuel pressure somewhat. Also these engines had a problem with valve guides that leaked oil into the cylinders. Good luck Edna!!
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SL300 interior light and Hot start problem | blacksl | Mercedes-Benz SL Discussion Forum | 18 | 02-02-2008 06:09 PM |
| 88 260e Hard Start...Too Rich | bountyhunter | Tech Help | 8 | 12-27-2004 01:43 PM |
| hot start problem S500 m119 | jchowe420 | Tech Help | 1 | 10-25-2004 05:52 AM |
| 300E Hot Start Won't Go | joel | Tech Help | 6 | 01-26-2001 12:38 PM |
| 250SL Hot start | M Reinwald | Tech Help | 2 | 07-25-2000 08:40 AM |
Linear Mode
