Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-31-2002, 08:54 PM
Registered User
Join Date: Jul 2001
Location: Motor City. MI
Posts: 73
'92 400E no start

400E No Start goes. '92 400E was/is having problem with ABS/ASR lites coming on after rolling a few feet.

started to try diagnosing wheel sensors, etc. and pulled all computer modules out of module box to check contacts for corrosion, etc.

got readings from sensors, ( had to move connector blocks a good bit), sprayed contacts & put modules back in box.

now, in addition to same fault lites, the car will not start. starter cranks, but no start. fuel pumps do not power-up when key is turned on. checked pump relay ( under rear seat) and extremely faint voltage there. jumped pins & fuel pumps work fine.

also, at diagnostic connector on module box, no voltage at pin #3.


Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 12:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page