PeachParts Mercedes-Benz Forum - m103 no start after changing potentiometer

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Tech Help (http://www.peachparts.com/shopforum/tech-help/)

- - m103 no start after changing potentiometer (http://www.peachparts.com/shopforum/tech-help/391541-m103-no-start-after-changing-potentiometer.html)

dennish

02-14-2018 03:31 PM

m103 no start after changing potentiometer

Initially I changed the potentiometer after car developed a problem with failure to idle. Fixed for a couple months, then failure to idle happened again(same symptoms). Changed the potentiometer again and now car will not start. Any ideas.?

Jorn	02-14-2018 07:34 PM

Did you set it to the correct spec with a voltmeter?

optimusprime

02-15-2018 04:37 AM

As jorn said above the potentiometer it not just a plug and play item .they need setting up .

dennish

03-08-2018 01:47 PM

Figured it out. It was the OVP. Yes, set the potentiometer to spec. Car runs good.

optimusprime

03-09-2018 06:31 AM

fandabydosy .

All times are GMT -4. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website