Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-05-2002, 05:07 PM
Registered User
 
Join Date: Jun 2002
Location: Wye Mountain, Arkansas
Posts: 3
'96 C36 fault code P1341

Hello Benz experts I am new to this forum and am very impressed already. In fact some participants / partners have assisted me before through IATN. I've got a '96 C36 in my shop with a hard MIL on for code P1341, variable camshaft control solenoid without function. The car seems to run fine but the code is constant so I assume the variable timing is inop. Alldata offers very little diagnostic info and I don't have a good dedicated European scanner. Any troubleshooting info or tips you can give will be very much appreciated. Thanks, Skip
Reply With Quote
  #2  
Old 06-05-2002, 06:39 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The most common cause for this code is a open circuit in the solenoid that allows the cam advancer to change positions.
Also the cam gear itself can bind & that also will cause this code.
THIS code is generated after only 1 test & if the oil is dirty(at the end of oil cycle) then you might not even have a problem at all.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page