Color sequence for console wiring

I need the color sequence for the console wiring for a 1989 19E 2.3. I inadvertently disconnected it while installing a heater. It is amazing that the core installing went very well but I disconnected the connector switch and I do not know why but I did. I have 15 colors and pronge which goes into 15 connectors. A1,with consist of e1 e2 e3 e4, etc. Please help.
As you know this connector is located on the bottom left of the dash console and it lights up the dash, show the fuel guages and reserves, oil pressure etc. Again thanks for your help!!!!

ON 1989 190E 2.3 15 WIRE CONNECTOR ARE.......
#1 GROUND-BROWN COLOR
#2 FUEL TANK RESERVE INDICATION SENSOR- BLUE/GREEN
#3 HIGH BEAM IDICATOR LAMP-WITHE/BLUE
#4 VACANT
#5 BRAKE LINING WEAR INDICATOR LAMP-BROWN/RED
#6 TERMINAL 15 PROTECTED-BLACK/BLUE
#7 TERMINAL 15 UNPROTECTED-BLUE/RED
#8 INDICATOR LAMP IGNITION TERMINAL 61-BLUE
#9 BRAKE FLUID INDICATOR LAMP-BROWN/RED/WHITE
#10 PREGLOW INDICATOR SYSTEM(DIESEL ONLY)
#11 RIGHT TURN SIGNAL INDICATOR-BLACK/GREEN
#12 LEFT TURN SIGNAL INDICATOR-BLACK/WHITE
#13 INSTRUMENT LIGHTING TERMINAL K-GREY/GREEN/PURPLE
#14 COOLANT TEMP SENSOR-GREEN
#15 FUEL GAUGE SENSOR-BLUE/BLACK
GOOD LOCK TO YOU.MAKE SURE BATTERY HAS BEEN DISCONNECT,BEFOR STARTING THIS MACHING GAME.