Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-06-2002, 08:09 AM
Wayne2970
 
Join Date: Dec 2001
Location: Grand Prairie, Texas
Posts: 123
Question Oil Changes..Sucking or Draining ?

Decided to DYI my oil changes..MB shop wants 94.00
I just noticed the Plastic pan underneath the engine and transmission.
I can't imagine dropping this pan for every oil change. This raises the question of sucking the oil out w/ one of several devices mentioned in this forum.


1. Do you really get more oil out by sucking ?

2. I have a 1992 300D which is the best device to do the job (8 qt oil pan)


opinions/Facts appreciated


Wayne

__________________
Wayne Jockers
1992 300D
Reply With Quote
  #2  
Old 06-06-2002, 08:45 AM
LarryBible
Guest
 
Posts: n/a
Mikes response is exactly right as far as I'm concerned.

The first priority is that the oil is changed, and changed often.

You will not get more oil out by sucking it out. In some cases you MIGHT get as much. The belly pan is really no problem at all. Just get an 8mm nutdriver or some such and spin out four screws, no big deal at all.

Now for my personal preference. Anyone who has read more than about five of my posts probably knows that I am a total mental illness level fanatic when it comes to oil changes.

I only drain oil when the oil is at operating temperature, which is after about 17 miles of driving minimum. I do it on a Friday night, pull the plug and let it drain all night. The last few drops that you get are the nastiest of it all, the real sludge. By draining it hot, the contaminants are churned up in the oil rather than stuck to the innards of the engine. I also change filter with every oil change.

As Mike said, the underneath method gives you the chance to see if there are any leaks, and look for anything that might be about to fall off.

Good luck,
Change oil hot and change oil often,
Reply With Quote
  #3  
Old 06-06-2002, 09:17 AM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
You might want to lock this thread until after you do a search. There is must discussion and debate on this topic.
__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
  #4  
Old 06-06-2002, 09:21 AM
DTF
Guest
 
Posts: n/a
I wanted to change my own oil too from below but the air dam on the front of my'94 W124 was too low for the car ramp I had. The road shield is no problem - goes on and off easily. I bought a Liquivac topsider and has worked very well. I believe you do get more of the crude from the pan out but one has to becareful about how much tube from the vacuum pump is in the oil pan as it could end up jammed in the lower engine requiring removal of the oil pan to free it up.
Reply With Quote
  #5  
Old 06-06-2002, 09:45 AM
Registered User
 
Join Date: Dec 2001
Posts: 577
There are two camps on this issue. The first or more traditional believes in bottom draining. Yes, pulling the pan may be a little more work, but you get to peek around underneath...see what's going on below. You might notice something that's about to become a problem. I don't mind pulling the pan.

The second group prefers using a "top sider" - device used to suction oil out the top. If your car has a top-mounted filter, you don't have to get on the ground. You stay clean. Many say they get more oil out this way and faster.

To me, it's irrevalent which way you go. Both drain oil. The main thing is to do it on a regular basis.

I suspect we'll see many posts on this issue.
Reply With Quote
  #6  
Old 06-06-2002, 04:50 PM
Registered User
 
Join Date: Mar 2002
Location: Great White North!!!!
Posts: 400
Exclamation sir larry.....

i would prefer to drain oil from the top.however,after reading you reply i have to wonder if your way is better and worth the extra effort.you say that draining gets the sludge.are you also saying that you can't get the sludge by sucking it?if you do indeed drain overnight,when it comes time to start in the morning (upon filling) are you worried about the engine having no oil for what must be several hours and then being started?i can understand that after a normal oil change there would be a film on all parts to start until oil pressure gets to normal.it seems to me you should prime the engine before starting.i'd be interested in trying your method but first i would need info on priming.
__________________
'95 s500 (bought for wife but can't bear to share!!!) 125kms
'92 legend 180kms
'88 tbirdturbo(fantastic car-only regular maint.)120kms
'87 mustang gt(gone)
'86 tbirdturbo(gone)
'85 mustang gt(gone-but not forgotten)
Reply With Quote
  #7  
Old 06-06-2002, 08:47 PM
Registered User
 
Join Date: Nov 2000
Location: Vernon, CT
Posts: 1,848
If one has been changing their oil reguarly, there shouldn't be any "sludge". With that said, I am in the camp that goes under the car. I don't follow the over night drain method, but I leave the drainplug out until the oil is at a very, very slow drip. Should there be any "sludge", I think the gravity and suction of oil pouring out of the pan is stronger than sucking it up through a tube. Also as mentioned, this gives you a chance to look around underneath.
For DTF, you can buy ramp extensions which would enable you to make use of your ramps. They are fairly common, and can be found at any Walmart or auto parts store.
__________________
1999 MB SL500 (110,000 mi)
2004 Volvo V70 2.5T (220,000 mi)
2014 Tesla Model S 85 (136,000 mi)
MBCA member
Reply With Quote
  #8  
Old 06-06-2002, 10:44 PM
Registered User
 
Join Date: Jan 2002
Posts: 352
I object to the overnight oil changes. By ridding the engine of 99% of its oil you are unnecessarily drying the seals of the engine. The seals are made out of plastic and with repeated instances of lack of oil they begin to crack and cause big problems. This is what the mechanic told me was the reason why oil seals become defective. He had just saw my 97 E320 with its front oil seal leak. Since the car only went 6000 miles a year, the periods of garaged rest actually destroyed the seal.

If I had just bought a car that had the infamous FSS 20k mile oil changes, I might tell the mechanic or service advisor to do this overnight oil changes but on normal cars, you dont have to worry about a couple drops of dirty oil. Remember, MB is not a "sludge" engine like Toyota Siennas.

As far as sucking or draining. If you have a jack at your house then just do it the normal way but if you are like me, you build up your biceps with the topsider.
Reply With Quote
  #9  
Old 06-07-2002, 12:02 AM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
I truly believe that cars need to be driven to ensure a long life. Sitting is BAD.

The people that drain their oil are right.

The people that LiquiVac/Topsider their oil are right.

The people that don't change their oil frequently are wrong.
__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
  #10  
Old 06-07-2002, 12:15 AM
Senior Canadian Member
 
Join Date: Jul 2000
Location: British Columbia, Canada
Posts: 827
Thumbs up Heh..well put, John and Mike. :)

Quote:
Originally posted by blackmercedes
I truly believe that cars need to be driven to ensure a long life. Sitting is BAD.

The people that drain their oil are right.

The people that LiquiVac/Topsider their oil are right.

The people that don't change their oil frequently are wrong.
Are there any more questions?

__________________
'94 W124.036 249/040 leder; 8.25x17 EvoIIs
'93 W124.036 199/040 leder; 8.25x17 EvoIIs, up in flames...LITERALLY!
'93 W124.036 481/040 leder; euro delivery; 8.25x17 EvoIIs
'88 R107.048 441/409 leder; Euro lights
'87 W201.034 199/040 leder; Euro lights; EvoII brakes; 8x16 EvoIs - soon: 500E rear brakes
'70 R113.044 050/526; factory alloys; Euro lights
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page