Euro Headlamp Wiper Blades
 

Does anybody know the OEM Part number for the Euro Style Wiper Blades to fit a W126?
I just realized they are different to the US type.
Thanks in advance.

Euro blades are 201 820 02 45 colour code 7175

Thanks Rick76
Colour Code? Aren't they all black?

Put your own new wiper rubbers in to the old retainers, idea is to use any wiper blades , remove the rubber wipers ,cut wiper rubber to length fix in to the holders.

Problem is that the old wiper blades (assembly not just rubber) do not fit into the European style wiper arms, that are much thinner at the point at which the wiper blade is connected. I am also told that the 201 820 02 45 wiper blades are no longer available.
If anybody has any suggestions what to use, I would be most grateful.

Attachment 152371

Attachment 152372

I have (one) A 124 820 02 45 black, blade arm, length of rubber blade is 160mm.

Not sure if it will help with your needs.

P.M. if interested

PM sent

mine are grey. But darn hard to find now a days in either color. I have looked at all kinds of windscreen blades but can't imagine how to fit them into my old pile of headlamp holders. <br><br/>


Is there a particular blade that is this skinny as the source material to cut down?<br><br/>


What I see about $100 a blade? Some fool in Istanbul is all over ebay. etsy. amazon etc but his ratings are poo. I have yet to search ebay.de ... perhaps this will be tonight's fun. <br><br/>



Can anyone help?

The original equipment manufacturer (OEM) part number for Euro style wiper blades that fit a Mercedes-Benz W126 may vary depending on the specific year and model of your vehicle. However, the OEM part number for Euro style wiper blades that fit a W126 according to some sources is A1268200845. It is always recommended to double-check with your local Mercedes-Benz dealership or parts supplier to ensure that you are getting the correct part for your specific vehicle.

Welcome aboard new Paul. Knowing the part number is not my issue. Locating parts is the issue. Hard to find. I think you typo'd that second 8 A1268200245 is the number I see most with or without the A And same part listed for other models such as 2018200245 and so forth. The BOSCH numbered parts are equally hard to source. Anybody have a box of NOS lying about?

Hot deals! https://www.ebay.com/itm/374893270942 ebay is now flooded with them and you get the arm blade and hose. Both sides in a set. This one is china but some are stocked in CA already for more $ but faster shipping.

Arrived. Some issues. The fluid hose is flimsy and easily collapses. It is too short for proper installation. Needs another ~cm or inch. I didn't measure, I used tubing I have in stock.

The base part that fits on the motor stalk does not have sufficient clearance for the socket to install the retaining nut.

The blades are held to the arms by a rivet type pin, so you can't easily use only the blade without getting creative. But for the $ you can just swap the entire thing cheaper than OEM blades. Oh well