|
|
|
#1
|
|||
|
|||
Euro Headlamp Wiper Blades
Does anybody know the OEM Part number for the Euro Style Wiper Blades to fit a W126?
I just realized they are different to the US type. Thanks in advance.
__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles 1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten) 2006 Volvo XC70 Blue/Beige 1999 Porsche Boxster Arena Red/Savanna Beige 1986 Porsche 928S Goldweiss/Brown Last edited by Dervman; 04-20-2019 at 03:04 PM. |
#2
|
|||
|
|||
Euro blades are 201 820 02 45 colour code 7175
|
#3
|
|||
|
|||
Thanks Rick76
Colour Code? Aren't they all black?
__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles 1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten) 2006 Volvo XC70 Blue/Beige 1999 Porsche Boxster Arena Red/Savanna Beige 1986 Porsche 928S Goldweiss/Brown |
#4
|
||||
|
||||
Put your own new wiper rubbers in to the old retainers, idea is to use any wiper blades , remove the rubber wipers ,cut wiper rubber to length fix in to the holders.
|
#5
|
|||
|
|||
Problem is that the old wiper blades (assembly not just rubber) do not fit into the European style wiper arms, that are much thinner at the point at which the wiper blade is connected. I am also told that the 201 820 02 45 wiper blades are no longer available.
If anybody has any suggestions what to use, I would be most grateful.
__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles 1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten) 2006 Volvo XC70 Blue/Beige 1999 Porsche Boxster Arena Red/Savanna Beige 1986 Porsche 928S Goldweiss/Brown |
#6
|
|||
|
|||
I have (one) A 124 820 02 45 black, blade arm, length of rubber blade is 160mm. Not sure if it will help with your needs. P.M. if interested |
#7
|
|||
|
|||
__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles 1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten) 2006 Volvo XC70 Blue/Beige 1999 Porsche Boxster Arena Red/Savanna Beige 1986 Porsche 928S Goldweiss/Brown |
#8
|
||||
|
||||
Yes, they're. But youu need this additional code for order it correct. A20182002457175.
Wiper blades A1268200245 were used on early models of 126. |
#9
|
||||
|
||||
mine are grey. But darn hard to find now a days in either color. I have looked at all kinds of windscreen blades but can't imagine how to fit them into my old pile of headlamp holders.
Is there a particular blade that is this skinny as the source material to cut down? What I see about $100 a blade? Some fool in Istanbul is all over ebay. etsy. amazon etc but his ratings are poo. I have yet to search ebay.de ... perhaps this will be tonight's fun. Can anyone help? |
#10
|
|||
|
|||
The original equipment manufacturer (OEM) part number for Euro style wiper blades that fit a Mercedes-Benz W126 may vary depending on the specific year and model of your vehicle. However, the OEM part number for Euro style wiper blades that fit a W126 according to some sources is A1268200845. It is always recommended to double-check with your local Mercedes-Benz dealership or parts supplier to ensure that you are getting the correct part for your specific vehicle.
|
#11
|
||||
|
||||
Quote:
|
#12
|
||||
|
||||
Hot deals! https://www.ebay.com/itm/374893270942 ebay is now flooded with them and you get the arm blade and hose. Both sides in a set. This one is china but some are stocked in CA already for more $ but faster shipping.
|
#13
|
||||
|
||||
Arrived. Some issues. The fluid hose is flimsy and easily collapses. It is too short for proper installation. Needs another ~cm or inch. I didn't measure, I used tubing I have in stock.
The base part that fits on the motor stalk does not have sufficient clearance for the socket to install the retaining nut. The blades are held to the arms by a rivet type pin, so you can't easily use only the blade without getting creative. But for the $ you can just swap the entire thing cheaper than OEM blades. Oh well |
Bookmarks |
|
|