PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   changing to a 190 e. 2.3 v16 rear end diff (http://www.peachparts.com/shopforum/tech-help/4003-changing-190-e-2-3-v16-rear-end-diff.html)

B.J. 05-06-1999 11:39 AM

Can you change rear end in a 190e 2.3 8v auto to a 190e 2.3 v16 limit slipp diff. If so what do I need to do,and what parts do I need.

M.B.DOC 05-06-1999 09:32 PM
Just depends on what year the car is. If the car is a 1987 or later then it's a bolt in. Otherwise expect lots of $$$$$ and parts. The axle flanges from the old rear will have to used in the 16V diff. Again only if it's a 1987 or newer.

b.j. 05-07-1999 11:30 AM
My car is 1985 190 2.3 with abs will it work

M.B.DOC 05-08-1999 09:07 PM
This would cost a lot of $$$ & time, axles driveshaft & ect.


All times are GMT -4. The time now is 06:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website