|
|
|
#1
|
|||
|
|||
I have a question as to the removal of the regulator. There appear to
be three screws holding it into the door frame. Will removing these allow me to remove the mechanism? the manual seems to require that the window be in the down position to remove the slider from the glass. My window is in the full up position. Can I still remove it? Thanks for your help. 1987 300D Turbo model 124. Jerry Keller jkeller@warwick.net |
#2
|
|||
|
|||
I will remove the window reg at window down
position because there is a clip to hold the reg jaw at window lower channel. |
#3
|
|||
|
|||
Thanks for replying to my question. I know that the window should be down, but mine is in the fully closed position. Since the regulator is not working, I have no way to roll down the window. Can it be done with the window up?
Thank you jerry keller jkeller@warwick.net |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1999 clk rear window regulator faulty | richard28 | Tech Help | 0 | 09-14-2004 02:43 PM |
Rear Window won't close completely | git0 | Tech Help | 12 | 06-20-2004 11:28 PM |
114 Coupe Rear Window Re-Seal | ctaylor738 | Vintage Mercedes Forum | 7 | 06-08-2004 10:26 PM |
W210 Rear Window Regulator | Ockman | Tech Help | 8 | 10-16-2003 09:53 PM |
S 500 Rear Pass. Window Problem | Quist1 | Tech Help | 1 | 11-01-2001 07:50 PM |