Klima Relay questions (1986)
I've done some research in the archives on the Klima Relay. However I want to make sure that the following is correct...
To activate the compressor, output 87 is given +12V (it's a bit unclear wheter the compressor is engaged with +12v or a ground signal). Is the output 87z put to +12v to signal the ECU to increase the idle? Alternatives are +5V TTL-level or a ground signal.. The Klima relay being analyzed has part # 002 545 13 05. |
Yes the 87 terminal needs 12V & goes to the A/C compressor. The terminal 15 right beside the 87 is power (12V) with the key on.
|
Thanks! I'll be busy troubleshooting stuff this weekend now :)
|
All times are GMT -4. The time now is 02:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website