PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   stalled 190e (http://www.peachparts.com/shopforum/tech-help/4062-stalled-190e.html)

frantz 05-11-1999 10:41 PM

I have this problem with my 190e 2.3 1987. I was driving it and the car just stopped and i was not able to start it again. The starter was already replaced, the distributor cap was checked and so was the wiring. The mechanics tells me it has something to with a faulty sensor that is linked to the transmission and that is cutting off the power. Would you have any info on that sensor?function?price? thanks

M.B.DOC 05-12-1999 08:25 PM

Does the starter motor work??? Does the engine turn over at all??

Benzmac 05-12-1999 10:14 PM

Has the fuel pump relay been checked??

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



frantz 05-15-1999 02:12 PM

Yes the engine turn. As for the starter motor i believe it works. The fuel pump does have to be change asper the mechanics but no words on the relay.

I also have a problem with the radio the anti-theft seems to be activated because i only have dotted line on the dial is there anything i can do or do i need to have it reprogrammed by MB. it`s a Becker Grand Prix.

altan 07-09-1999 01:00 PM

Hi Benzmac
How do I confirm the fuel pump relay is
the cause when car start to stall once a while. It can be then restarted immediately with no problem and idling smoothly at
around 750-800 RPM.
Could it be the CIS-E computer contact
problem as described by RAE190 ?.
I am worry as most the stall problem
in this forum does not have a solution.
In fact some of owners spend a lot of $$$
by replacing this and that without the
problem resolved.
Any help is appreciated.
Thanks
AL

Benzmac 07-09-1999 09:59 PM

A tech can usually open the relay and look at the circuit board. If there are any black or burned spots it should be replaced. Also sometimes I have seen solder cracks in the board.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



altan 07-11-1999 11:38 AM

Thanks Benzmac, I got the FP relay replaced
yesterday after the car permenantly stalled
while on the way home. It is working now now and hope the stall problem is gone as well.
Thanks
AL

altan 07-11-1999 11:58 AM

I got the relay checked before but no sign
of failure. However, the car stalled
permenantly yesterday while on the way
home. After replacing the FP relay, the
car run as normal and hopefully, the stall
problem is gone as well. BTW, is it
neccessary to keep a spare FP relay like
a spare tyre since it is known to be defective.
Thanks.
AL

Benzmac 07-11-1999 10:06 PM

The new relay will only fail if the amperage draw of the fuel pump exceedes the limit of the circuit of the relay. The new relay has a re-designed curcuit board that will not fail like the old one.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



altan 07-12-1999 08:29 AM

Thanks Benzmac.


All times are GMT -4. The time now is 05:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website